1200Ton Plastic inejction molding machine / IMC For Trash Can /
Ash-bin With PP/ PVC
Our machine offer a large rangee of injection capacities with
precise seven-stages injection control.
Three injection units are offered for each moldel to suit your
The use of high precision linear displacement transducers ensures
total repeatability of the injection settings.The hydraulic screw
motor transmits power to the standard nitrided screw ensuring
optimum performance when processing a wide range of material.
Twin injection cylinders provide smooth movement,reduce structural
stress and ensure long machine life.
- 1. APID temperature control, precise temperature control of barrel.
- 2. There are three or four screws and barrels with optimal design,
respectively, nitride, hard plating, dual-metal, which is suitable
for different processes of variety of plastics. And the choice of
- 3. Two -guided guided bar supports, double-balanced rapid
- 4.The high-torque hydraulic motors offer a stable plasticizing
capacity, high-precision electronic device position detection
enable accurate measurement.
- 5. Multi-injection speed and pressure and multi-level holding
pressure settings, switch from the injection time, location,
pressure control to ensure the quality of molding.
- 6. Multi-level back-pressure of pre-plastic and pre-speed are
computer-controlled, anti-drooling and automated auto purge.
- 7. Expected to prevent cold-start function to ensure that the
screw, barrel will not be harmed. Stability of the injection unit.
- The manual plug valve hydraulic system make the machine having
quick and smooth motion response
- Double proportional valve control pressure and flow
- Hydraulic oil cooling device
- High-performance imported hydraulic unit with optimizing allocation
- The fuel tank has a big opening hole so can be cleaned easily
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy,low noise,high-control
precision,and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
|INTERNATIONAL CLASS NO||HC1200|
|Screw L/D ratio||L/D||23||22||21|
|Space between tie bars(W×H)||mm||1220×1100|
|Pump motor power||kW||45+55|
|Number of heating Segment||7+1|