90 Ton Plastic Injection Molding Machine With PP / PS / PA For
Phone Shell 12 Cavities
Some of the important features:
Clamping system: Faster response, stable and high rigidity
Injection system: Accurate and flexible, lower rejection rate
Control system: Computer and simple operation,molding data memory
Power system: Energy saving, high efficient and precise
Metal parts: The thickness of our frame, metal plate and wallboard are thicker
than other company.
Show High Precision: The accurate injection positioning,pressure, speed and pressure
maintaining,to ensure the repeatability error of injection accuracy
less than 0.3% to achieve precision molding.
Super EnergySaving Features: Compared with standard injection machine,the energy saving rate
can reach 40%-70% for the same plastic production.
High Efficiency: Compared with standard machine,the total efficiency can increase
by 10% and dragging capacity is can increase by18%.
High Response System:The system acceleration and deceleration performance is quite agile
and force&speed regulation is very sensitive.The sampling
processing speed can reach 100KHZ and system quick start time can
Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining
is smooth and accurate.
Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation
during operation.Improve the operation performance.promote using
efficiency and save a large quantity of cooling water.
1. APID temperature control, precise temperature control of barrel.
2. There are three or four screws and barrels with optimal design,
respectively, nitride, hard plating, dual-metal, which is suitable
for different processes of variety of plastics. And the choice of
3. Two -guided guided bar supports, double-balanced rapid
4.The high-torque hydraulic motors offer a stable plasticizing
capacity, high-precision electronic device position detection
enable accurate measurement.
5. Multi-injection speed and pressure and multi-level holding
pressure settings, switch from the injection time, location,
pressure control to ensure the quality of molding.
6. Multi-level back-pressure of pre-plastic and pre-speed are
computer-controlled, anti-drooling and automated auto purge.
7. Expected to prevent cold-start function to ensure that the
screw, barrel will not be harmed. Stability of the injection unit.
|INTERNATIONAL CLASS NO||HC90|
|Screw L/D ratio||L/D||22||20.1||18.5|
|Space between tie bars(W×H)||mm||360×340|
|Pump motor power||kW||11|
|Number of heating Segment||3+1|